400dpiLogo.jpg

Steering Wheel Wrap threading instruction 

You'll need 2 needles and 0.8mm (or thicker) polyester thread.

 

Lighter will be useful for finishing the knots by melting the ends .  

1. Positioning 

IMG_8671.png

2. Threading  

IMG_8674.png

Especially important to tie well at the spokes

IMG_8664.png

I recommend working between spokes.

Start from one spoke and finish at the next spoke. 

Thread length : You will need approximately3 times the length you are threading. i.e measure the distance between spokes and time by 3, then cut the thread.

Start with both ends of the thread coming OUT of the leather. (left photo)

Cross the threads and go IN to the 2nd holes down from the initial ones.

Then OUT from the ones Next to it. 

You should end up as below photo. 

Repeat the steps until you hit the next spoke. 

Tie a knot and cut the thread, melt the ends with a lighter flame. 

IMG_8675.png
IMG_8677.png
IMG_8672.png
IMG_8679.png